Drum Flaker performance and characteristics

1, There are 2 ways of distributing, including upper distributing and rear feeding. Based on the characteristics of chemical materials, there are single drum type and
double
drum type.

2,The trough insulation is provided with steam insulation, heat transfer oil circulation insulation and electric heating
heat
transfer oil insulation

3,The equipment is divided into open type and semi-closed type, fully enclosed type, vacuum type and nitrogen protection
type.

4,Blade materials include brass, tin bronze, steel plate, nylon, bakelite, phenolic resin and alloy hacksaw blade.

5,The discharging system has single outlet, double outlet and storage outlet.

6,Special requirements: the regular shape and size of the material can ensure the thickness and size uniformity of the
material.

7,The cooling or (heating) system has split jacket type or spray type and special spoiler technology. It is designed
according
to the size and specification of the slicer and the characteristics of the material, which can improve the heat exchange efficiency, increase the
strength of the rotating
drum,
and increase the output of the relative products. Through actual measurement, it can be increased by 0.3 to 1 time compared with the general
conventional tablet machine.

8,Rotating joint is adopted for cooling water, which can reliably prevent water leakage, and new process is applied to
reduce
the consumption of cooling water.

9,Both ends of the drum are provided with thermal insulation layers and side scrapers, and there is no binding at both ends
of
the drum, so there is no friction power consumption at both ends of the drum, and the problem of unstable startup due to end binding is eliminated.