Plough Shear Mixer
Providing you the best range of Plough Shear Mixer, with effective & timely delivery.
Product Details:
| Minimum Order Quantity | 1 Piece |
|---|---|
| Capacity | 300 Litres |
| Brand | BPE |
| Design Type | Standard |
| Motor Power | 5 HP |
| Material | Stainless Steel |
| Power Source | Electric |
Features :
- Low maintenance
- Easy to use
- Longer functional life
- Fine quality
- Rugged
- Precise design
Additional Information :
- Item Code : PSM
- Pay Mode Terms : L/C (Letter of Credit),
T/T (Bank Transfer) - Port of Dispatch : Nava Sheva Mumbai
- Production Capacity : 10 Units/Month
- Delivery Time : 4 Weeks
- Packaging Details : Wooden Packaging
Plough Shear Mixer consists of a horizontal cylindrical container with multiple plough shaped shovels mounted on the main shaft. Abster offers a wide range of capacities from 5 liters to 20000 liters in all material grades.
Design Highlights:
- The feed is subjected to a whirling, three-dimensional product movement.
- Mixing elements are specially designed to lift the material from the inside wall of the container without squashing the particles against the wall.
- High-speed choppers (optional) installed to disperse agglomerations and control granulation during the mixing process in co-ordination with the mixing elements.
- Chopper Action Single or multiple choppers are located in the lower part of the mixing container in such a way that the chopper assembly is inserted into the wall of the container at points in between the flights of two adjacent mixing shovels.
- The high-speed choppers remove lumps in the raw material, chop pasty additives and prevent formation of agglomerates on liquid addition in the Plough Shear Mixer.
- The choppers can be switched on and off, independent of the main drive shaft. Thus, the influence of the chopper action on the product mix can be controlled.
- Jacket for heating, cooling.
- Wear resistant liner plates for abrasive products.
- Split design stuffing boxes, Air-purging stuffing boxes, Mechanical Seals.
- Spraying system for liquid injection.
Description
Abster supplies superior quality Plough shear mixer as Pharma Equipment. It is on its own shaft and requires additional equipments. Some sets of plough shears are install on the main shaft in disruption and incessantly, which avoid the addition dead zone in arrangement. When functioning, material in mixer tank move following the direction of the incessant vortex centrifugal force generated by the incessantly amalgamation plough shears, thus to attain dispersal, disperse and fast mixing of material. Some materials like fiber or some moist agglomerate material, high speed chopper are exceptional material and can be installed within mixer tank. The tank, then scatter and dispense these materials with amalgamation of plough shear mixing agitator. The high speed choppers are located at the barrel side downward angle of 45 degrees of the plough shear mixer, the chopper heads elongate into the barrel. The effective range of choppers, supplied with plough dryer, ensures the thorough mixing of materials and also shears in high haste.
Powerful auxiliary components:
The plough dryer incorporates numerous auxiliary mechanism, like honeycomb pressure jacket, sampling valve, weighing system, high speed chopper temperature sensor steam coil jacket, medium circulation jacket, etc. Dissimilar heat medium require with different jacket, it be able to use for heating and cooling, while, the temperature must be within 250 Celsius degree. If a diminutive quantity of liquid is necessary throughout mixing, spraying or atomizing unit is essential in order to combine the liquid consistently with the main constituent. The liquid-adding arrangement is essentially composed by the three parts: spraying nozzles, liquid storage pot and pressure source.
Tight shaft sealing:
Three types of main shaft sealing for plough mixer: packing sealing, combine type air-purged, mechanical sealing, sealing, are used for micron grade powder, granule, powder, slurry material, and liquid.
Application:
Plough shear mixer is intended and enhanced on basis of main stream mixing technique and it is appropriate for mixing multi-material. Plough shear mixer can be used for the procedure of solid powder material, granule material. It is also capable of performing course mixing in which there is a necessity for extra liquid. These mixers are extensively preferred for application in building material, chemical, food etc.
Flexible material selection:
Material of plough dryer can be chosen from SS304, 316L, and 321, carbon steel, manganese steel, as well different material can also be used in mixture. Material is dissimilar among the part of contact with the raw material and the parts don`t contact with the material. Exterior treatment for SS contains mirror polishing sandblasting, polishing, wiredrawing all can be used in changed parts of a mixer.
Reliable driven unit:
The driven unit, power and output speed is diverse according to dissimilar processing, raw material, and starting method. Option for motor are energy saving motor, high efficiency, frequency motor, explosion-proof motors and general motors, variable Commonly used reducers are planetary gear reducer, universal gear reducer, cycloid reducer, F-series gear box R-series, and K-series. Commonly used connections are hydraulic coupler connection, pulley connection, and direct connection.
Plough shear Mixer – High efficiency unit:
The ploughshear mixer comprises of plough heads which can be dismountable, providing an option of easier replacement. Wear-resistance treatment is complete on the plough, making the plough is more modified to the rigorous wear conditions. Dissimilar main shaft agitators can be capable of according to the properties of raw materials.
Main shaft agitators are shaver-shaped paddle, saw-toothed plough, and ordinary plough; high speed choppers are multiple-piece cross blade and double-piece lotus blade.
Ploughshear Mixer
Ploughshear mixer & dryer is a single shaft compulsory mixing equipments. Some sets of plough shears are installed on the main shaft in dislocation, which avoids the mixing dead zone in the structure. While processing, the material in the mixer tank moves in the direction of the votex centrifugal force generated by the constantly blending plough shears, hence to achieve scattering, dispersing and fast mixing of material.
In a plough shear mixer for materials like fiber or some damp agglomerate, a high-speed chopper can be placed in the mixer tank for scattering and dispensing the materials with combination of plough shear mixing agiator.
The position of the high speed choppers is set at a downward angle of 45 degrees (barrel side) of the plough shear mixer and the chopper heads stretch into the barrel. While mixing, materials are brought to the effective range of the chopper and sheared at high speed.
Sloping blades or plough blades are set on single shaft. When plough mixer is operating, the material is continuously mixed by the special structure. The dead corner is avoided with radial and longitudinal movement simultaneously, hence highly accurate mixing is achieved.