Solution Preparation Vessel is used for manufacturing and mixing of suspension. It has a cylindrical shaped vessel with top and bottom dishend. A high speed three blade propeller type stirrer is mounted on top dish for mixing while an inline high shear mixer is provided at the bottom for the homogeneous mixer. Speed of stirrer is variable and can be varied with the help of variable ac frequency drive motor. The speed can be increased or decreased by rotating the knob on the FLP control panel. Stirrer shaft is supported by SS bearing housing with two nos. taper roller bearings for more stability of shaft at higher speed and coupled to the motor shaft by a flexible coupling. Top dish can be opened pneumatically by pneumatic cylinder and sealed with gasket. All contact parts are in SS316 and mirror polished. All non-contact parts are in SS 304.
PREPARATION VESSELS, REACTOR & TANK:
- Design compliance with cGMP
- Capacity up to 25,000 Liter.
- Product Contact AISI 316L.
- Vertical & Horizontal design
- Atmospheric, Vacuum or Pressure Operation.
- Plain, Jacket for heating & cooling.
- Option for Heating by steam, hot water or tharic fluid oil & Electric heater
- Thermal Insulated.
- Mechanicals or Electro polishing of internal surface.
- Welded, flanged or hinged type cover
- Integrated Cleaning in Place-CIP.
- Sterilizing In Place-SIP as an Option.
- Option for mounting on legs or flange.
- Portable execution on request.
- Validation protocols & Instrumentation celebration.
VARIABLE SPEED AGITATION:
- Agitator can be top or bottom driven or magnetically driven.
- Propeller type, Anchor type provided with High speed disperser or rotor-stator homogenizer.
- Single or double mechanical seal.
TURN KEY PROCESS LINE:
- For production, filtration, transfer and storage solution.
- Pre reparation vessels.
- Inline homogenizer.
- Inter Connecting Pipe
- Solid or sugar Charging System
- Working Platform.
Product Description:
- Solution tank with Variable Frequency Drive with stirrer and mount on Castor wheel for ease of movement.
- Tangential discharge of solution for spraying from bottom of tank.
- Manually operated ball valve at the center of tank for cleaning.
- Direct motor drive for impeller and control through variable frequency drive
- Anchor type impeller at maximum level of tank for mixing of minimum solution.
- 25 % open able type top cover for process visualization.
- Jacketed tank can be provided for sugar coating application at an additional cost.
- Separate liquid line will be carried out from the bottom of tank for each spray nozzle for equal flow.
- Returned excess liquid line is provided in spray arm assembly which will discharge the excess liquid in to tank through returned liquid line.